NeilMed SINUS RINSE is an easy squeeze bottle system that allows you to deliver the saline solution with positive pressure to clean the nasal passages thoroughly, while maintaining your head in an upright position. You have complete control of the pressure and volume of solution, ensuring a gentle, soothing and therapeutic experience. Daily rinsing is safe and will keep your nasal passages clean, healthy and open.
Nasal Allergies, Dryness & Hay Fever
Sinus Pressure & Nasal Stuffiness
Nasal Symptoms from Flu & Cold
Nasal Irritation from Occupational & House Dust, Fumes, Animal Dander, Grass, Pollen, Smoke, etc.
Post Nasal Drip & Nasal Congestion
Available in 120 or 30 sachets.
Each sachet has USP Grade (Purity level 99% or higher) Sodium Chloride and Sodium Bicarbonate Mixture (pH balanced, Isotonic, Preservative & Iodine Free).
Please wash your hands. Fill the clean bottle with the designated volume of lukewarm distilled, filtered or previously boiled water. You may warm the water in a microwave in increments of 5 to 10 seconds to avoid overheating the water, damaging the device or scalding your nasal passage.
Standing in front of a sink, bend forward to your comfort level and tilt your head down. Keeping your mouth open, without holding your breath, place the cap snugly against your nasal passage. SQUEEZE BOTTLE GENTLY until the solution starts draining from the OPPOSITE nasal passage. Some may drain from your mouth. For a proper rinse, keep squeezing the bottle GENTLY until at least 1/4 to 1/2 (60 mL to 120 mL or 2 to 4 fl oz) of the bottle is used. Do not swallow the solution.
Blow your nose very gently, without pinching nose completely to avoid pressure on eardrums.
Now repeat steps 3 and 4 for your other nasal passage.
Clean the bottle and cap. Air dry the SINUS RINSE bottle, cap, and tube on a clean paper towel or use NeilMed NasaDOCK or NasaDOCK plus (sold separately) to store the bottle, cap and tube.
Always rinse your nasal passages with NeilMed SINUS RINSE packets only. Our packets contain a mixture of USP grade sodium chloride and sodium bicarbonate. These ingredients are of the purest quality available to make the dry powder mixture.
Rinsing your nasal passages with only plain water without our mixture will result in a severe burning sensation as the plain water is not physiologic for your nasal lining, even if it is appropriate for drinking. Additionally, for your safety, do not use tap or faucet water for dissolving the mixture unless it has been previously boiled for five minutes or more as boiling sterilizes the water.
Other choices are distilled, micro-filtered (through 0.2 micron), commercially bottled or, as mentioned earlier, previously boiled water at lukewarm or body temperature. You can store boiled water in a clean container for seven days or more if refrigerated. Do not use non-chlorinated or non-ultra (0.2 micron) filtered well water unless it is boiled and then cooled to lukewarm or body temperature.
Do not rinse if your nasal passages are completely blocked or if you have an ear infection or blocked ears. If you have had recent ear or sinus surgery, contact your physician prior to irrigation. If you experience any pressure in the ears or burning in the nasal passages, stop irrigation and get further directions from your physician. Keep out of reach of children. Read and retain this enclosed brochure for instructions and other important information.
The SINUS RINSE bottle and mixture are to be used only for nasal irrigation. Do not use for any other purposes.
It is recommended that you use the rinse ONE HOUR PRIOR to bedtime in order to avoid any residual solution dripping down the throat.
Medicines have benefits and some have risks. Always read label carefully and use strictly as directed. If symptoms persist or you have side effects, please consult your doctor or healthcare professional
The information provided does not replace the individual advice and consultation of a doctor or pharmacist